To anyone with knowledge of ropes

[ctbsd24]

Quick question for any rope experts out there.

I have a 12mm, double-braided nylon dockline rope for a full suspension hanging. Unfortunately, the smallest length I was able to obtain is 25 feet. Obviously, I don't need that much. Probably not even half that much. Is there a way to cut the rope so it doesn't fray or lose it's strength/integrity?

 

[heyhoherewego]

Quick question for any rope experts out there.

I have a 12mm, double-braided nylon dockline rope for a full suspension hanging. Unfortunately, the smallest length I was able to obtain is 25 feet. Obviously, I don't need that much. Probably not even half that much. Is there a way to cut the rope so it doesn't fray or lose it's strength/integrity?

i ran into the same problem, i have nothing which can quickly and sharply make the cut. but wrapping some tape at the cut end might prevent fraying and maintain the integrity of the rope, alteast thats what ive done

 

[ctbsd24]

i ran into the same problem, i have nothing which can quickly and sharply make the cut. but wrapping some tape at the cut end might prevent fraying and maintain the integrity of the rope, alteast thats what ive done

thanks. I might try that if I don't hear from anyone else. I know at least one source online said to wrap it in duct tape and cut the rope kind of in the middle of the tape. Not sure where I can find a tool to cut it cleanly enough.

 

[Worndown]

No reason to cut it, just let the extra rope hang. Make sure the extra is at your tie-off point.

 

[UnlovedUnlived]

At work I use a few wraps of electrical tape and then cut it with a knife. It's really the only way to prevent fraying unless it's a synthetic rope where you can melt it afterwards.

 

[ctbsd24]

At work I use a few wraps of electrical tape and then cut it with a knife. It's really the only way to prevent fraying unless it's a synthetic rope where you can melt it afterwards.

It's double-braided nylon dockline (see picture). Would tape/knife work for it? Also, duct tape or electrical tape?

 

[Worndown]

If you must cut it, tape at the cut will help. Then you nerd a lighter to gently melt the cut end so it will not fray. Better off leaving it. Who knows, you might need to change location and need a longer rope.

 

[ctbsd24]

If you must cut it, tape at the cut will help. Then you nerd a lighter to gently melt the cut end so it will not fray. Better off leaving it. Who knows, you might need to change location and need a longer rope.

Thanks, you've always been a super helpful resource

 

[pithyone]

No reason to cut it, just let the extra rope hang. Make sure the extra is at your tie-off point.

Could you elaborate more on this? Don't really understand.

 

[Worndown]

Just don't worry about cutting off the extra rope.

 

[TronX]

Anybody here know how to get your hands on the right rope and how to tie the appropriate knot?
(Know I'm a bit late)