Help EXIT BAG+ INERT GAS

[david2]

The essential thing is to get inert gas at 99.99% purity, but in my country it is difficult to get pure nitrogen, I found helium at 99.6% purity and maximum 1000 PPM of impurity. In your opinion, could this work at that degree of purity?

 

[Donutsniffer]

I would say yes. Consider also looking at Argon (welding supplies etc). It's a heavier gas but will do the job, but you should find some high purity cylinders easily. I have two at 99.996% from a welding/brewery supplier with no questions asked.

 

[outrider567]

The essential thing is to get inert gas at 99.99% purity, but in my country it is difficult to get pure nitrogen, I found helium at 99.6% purity and maximum 1000 PPM of impurity. In your opinion, could this work at that degree of purity?

99.0% and above always works

 

[david2]

I would say yes. Consider also looking at Argon (welding supplies etc). It's a heavier gas but will do the job, but you should find some high purity cylinders easily. I have two at 99.996% from a welding/brewery supplier with no questions asked.

Nitrogen and argon are impossible to get in high purity in my country. I hope the helium works

 

[david2]

99.0% and above always works

Thank you