Help Help with eebd hood connections

[Queen B]

I need help with continuing the valve and the gas regulator. So I see this person Not cutting the valve and I really liked this however I'm very lost. Can someone help me name these barbs that I can use to connect r22 r22 r134a hose to 1SB-PS AIR HOSE I.D 1/4" W.P 20BAR B.P GOBAR

 

[locked*n*loaded]

The connections you show are quick connects, not barbs. I'm not sure what you're trying to do. I guess you want to extend the hose from the hood to the flowmeter? What is the fitting on the flowmeter where a hose is to be attached? Links to all of the apparatus you have might be helpful. Adapting those AC hoses to some kind of quick connect fitting might be difficult. It may involve using 2 different adapters if it even can be done.

I understand your reluctance to want to cut the fitting off the hose coming from the hood, but it is just so much easier to do that, get an appropriately sized barb and another length of hose, and then just join them together that way.

 

[Queen B]

The connections you show are quick connects, not barbs. I'm not sure what you're trying to do. I guess you want to extend the hose from the hood to the flowmeter? What is the fitting on the flowmeter where a hose is to be attached? Links to all of the apparatus you have might be helpful. Adapting those AC hoses to some kind of quick connect fitting might be difficult. It may involve using 2 different adapters if it even can be done.

I understand your reluctance to want to cut the fitting off the hose coming from the hood, but it is just so much easier to do that, get an appropriately sized barb and another length of hose, and then just join them together that way.

I'm scared of leaks plus I know that I'll be so nervous at that day so mistakes can occur more

 

[locked*n*loaded]

I'm scared of leaks plus I know that I'll be so nervous at that day so mistakes can occur more

Just an fyi, you're more likely to get leaks using quick-connect fittings rather than just sliding a couple hose ends on a barb and securing them with a clamp.

 

[Queen B]

Just an fyi, you're more likely to get leaks using quick-connect fittings rather than just sliding a couple hose ends on a barb and securing them with a clamp.

Really I didn't think about it like that. If that the case, can you please help me with what the names of the barbs and others things I'll need to Connect and expand the hose?

 

[martinso67]

I'm scared of leaks plus I know that I'll be so nervous at that day so mistakes can occur more

If use an adapter (also a rectus) adapter on the regulator output, then there will be a small leak. With one big leak (gas bottle-regulator connection and small leak (regulator-adapter hose connection), I still reached below recommended limit of 2% oxygen after about 6 minutes.

Small leaks (after the regulator output) can be fixed with a PTFE tape or any tape that is certified for gas. It's mentioned in the product description.