Nitrogen tank

[Willthishelp?]

I found a tank on Amazon but it's 8 liters and
There is 1.8m3 of gas in the tank. The purity is 4.0 but it is of very good quality.

Would that be enough for ctb how big the tanks must be. Actually it is compressed right?
Which tank Vizzy used with his eebd hood?

 

[anonaon]

That tank can kill you 12 times. Both volume & putity are sufficient.

The minimum requirements for a tank are 1) has to be 600L (uncompressed) & grade 2.8 (99.8%) purity

 

[Willthishelp?]

Do you have a link to a tread where that says the amount of liters? cause another member said I need 1000 liters .. convused..

 

[Das Nichts]

Do you have a link to a tread where that says the amount of liters? cause another member said I need 1000 liters .. convused..

1,8 m³ are 1800 liters. With a flow rate of 15 liter per minute (1800 / 15) you get 120 minutes of constant flow.
Your dead after 10 minutes.

Read the inert gas chapter of the pph/ppeh.

 

[Willthishelp?]

1,8 m³ are 1800 liters. With a flow rate of 15 liter per minute (1800 / 15) you get 120 minutes of constant flow.
Your dead after 10 minutes.

Read the inert gas chapter of the pph/ppeh.

Thank you , I want to use eebd and want to use vizzys setup but can't find his post with all the essentials

 

[Das Nichts]

Thank you , I want to use eebd and want to use vizzys setup but can't find his post with all the essentials

Here you go:

Nitrogen gas with EEBD hood Guide (Inert gas Method)

NITROGEN GAS WITH EEBD HOOD (INERT GAS METHOD) before I start this guide, let’s be honest this method is expensive (approximately 600 to 800 dollars)and you need minimum 1 -2 months to source the equipments and nitrogen gas cylinder. My tip for you to do it cheap, purchase the Chinese products...

sanctioned-suicide.net

 

[Willthishelp?]

The tank comes with a regulator but this is not the right one right?

 

[outrider567]

That tank can kill you 12 times. Both volume & putity are sufficient.

The minimum requirements for a tank are 1) has to be 600L (uncompressed) & grade 2.8 (99.8%) purity

99.0% is sufficient, as per Greenberg, and GasMonkey mentioned several people who CTB'ed successfully with 99.0% purity

 

[Willthishelp?]

99.0% is sufficient

They say no purity

 

[outrider567]

They say no purity

You can always ask the supplier to get the exact percentage

 

[Willthishelp?]

You can always ask the supplier to get the exact percentage

Yes I just did but also really need help with understanding and sourcing the other supplies

 

[outrider567]

Yes I just did but also really need help with understanding and sourcing the other supplies

That's what the Inert GaS Mega Thread is for